Charger for two li-ion batteries – Xtar VC2 – charge from the usb port!

14,80  Sis. Vat 24%

Find out the actual capacity of your battery!
• Lcd display provides all the necessary information
• Micro-USB charging port, charge anywhere you want
• Charge all major li-ion batteries
• Intelligent and efficient charging process that wakes up your dead batteries (TC-CC-CV) 0.5A x 2.

Out of stock

EAN: 6952918320388SKU: xtar-vc2Department: Keywords for , ,

Description

Xtar's guaranteed quality: dual battery smart chargers with USB compatibility. Charge your phone with a charger! Compatible with almost all lithium batteries. Put the batteries in the charging and let the charger do the rest! Three-phase (TC-CC-CV) charging ensures the best possible charging current and voltage for the battery.

On top of that, you can use this charger to measure how much capacity is charged to the battery! If the battery always starts receiving fewer amperage hours, you will be informed in real time and do not have to go on a long journey with tired batteries. Charged capacity is a certain thing different from the actual capacity of the battery, lithium batteries should never be completely discharged, so the amount of charged mAh indicated by the charger is hopefully less than the maximum battery capacity.

The charger also has advanced battery protection features such as short circuit, overheating and reverse battery protection. Precise shut-off when the battery reaches full voltage ensures that the battery is in good condition for a long time. If necessary, the charger can also wake up dead batteries thanks to three-phase charging.

What is three-step TC/CC/CV charging?

The automatic charging process keeps the battery cells in good condition for a long time by charging at the appropriate voltage at all stages, and by switching off the charging at the appropriate time. The three charging steps are:

  • TC (Trickle Charge) Wake-up: Deep discharged cells at less than 2.9 V are brought to life at a lower voltage
  • CC (Constant Current) Constant current: The battery cell is charged with a constant current when the voltage exceeds 2.9V. The charging current of the Xtar D4 battery charger can be 2x2A/4x1A/2×0, 5A (CH2 & CH3) + 2x1A.
  • CV (Constant Voltage) Constant voltage: When the battery is almost fully charged, the charger will start to reduce the charging current (A) until the battery reaches 4.2V volt (V). When the battery voltage is 4.2V, the battery is full and the charger stops charging.

The charger keeps batteries above 4.1 V fully charged. If you want to fully charge this type of battery, you must insert it into the charger before plugging in the charger. All batteries discharge with time naturally on their own. If the batteries are stored in the charger, charging starts when the battery voltage drops below 4.1 volts.

Xtar VC2 Charger Features

Power in DC: 5V 1.0A

Continuous charging current: 500mA*2
Voltage cut-out (charging voltage): 4.20V
Cut-off current: ≤80mA
Operating temperature: 0-40°C
Weight: 109g
Dimensions: Length 131, width 66, height 33mm
Compatibility: 10440/14500/14650/16340/17500/17670/18350/185000/18650/18700/22650/25500/26650 3.6/3.7V Li-ion batteries

Warranty 24months

Link to the English charger test: https://lygte-info.dk/review/Review%20Charger%20Xtar%20VC2%20UK.html

”The charger is a nice for car and travel usage and can also be used at home, but it is a good idea to find a power supply that can supply enough current and voltage for full charge speed. Remember to use a short cable between power supply and charger to avoid slow down due to losses in the cable.

I will call it a good charger."

 

Additional information

Weight 140 g (gramma)