14500 battery Sanyo UR14500P 840mAh without circuit, flat head

7,90  Sis. Vat 24%

Genuine Sanyo UR14500P 840mAh battery with flat and no protective circuit. Sanyo batteries are of very high quality, and the Sanyo UR14500P battery does not make an exception.

Out of stock

SKU: TIFB008Category: Tags for , , , ,

Description

Genuine Sanyo UR14500P 840mAh battery with flat and no protective circuit. The battery is momentarily capable of producing 3.0A of current, but the recommended maximum continuous discharge current is 1.68A. Sanyo batteries are of very high quality, and the Sanyo UR14500P 840mAh battery does not make an exception.

Technical data: Sanyo UR14500P, flat head, no protective circuit

  • Nominal capacity: 840 mAh
  • Minimum capacity: 800 mAh
  • Rated voltage: 3.70V
  • Normal charging: 560mA to 4.2V voltage, maintenance current 16mA
  • Maximum charging voltage: 4.2V (maximum voltage to which the battery can be charged)
  • Maximum charging current: 0.84A
  • Lowest cut-off voltage when disassembling: 2.75V.
  • Maximum continuous discharge current: 1.68A
  • Dimensions: 49.2mm x 14.5mm
  • Weight: 21.0 g
  • Re-download: Not announced
  • Chemistry: Li-Ion

At least these things are taken into account when using the battery!

If your battery does not have a protective circuit, remember the battery safety and correct use of the battery! Li-Ion batteries contain a lot of energy and can even explode or ignite when used incorrectly.

  • Use a high-quality charger to charge at the latest when the battery reaches 4.2V voltage.
  • Always perform charging under supervision
  • Do not disassemble the battery below the lowest discharge voltage (usually approx. 2.5V)
  • Do not exceed the maximum charging current of the battery
  • Do not exceed the maximum discharge current of the battery
  • Do not short-circuit the battery
  • Do not attempt to remove parts from the battery or otherwise mechanically
  • Do not exceed the maximum permissible battery temperature when charging or
  • Do not use batteries with a damaged cover
  • Do not attempt to remove the metal parts of the
  • Do not let the battery get wet
  • Do not connect cables or connectors to the battery with a standard soldering
  • Store batteries so that they do not touch each other
  • If your device has more than 1 battery, always use and charge them together

Additional information

Weight 50 g (gramma)
Power amp

Size

Capacity mAh

Protective circuit

Manufacturer