Description
KeepPower 14500 battery with 4.0A circuit has the exact same battery as the KeepPower 840mAh battery. The battery has a Panasonic-owned Sanyo sensor that first received a capacity label of 800mAh and later changed to 840mAh, which better reflects reality.
KeepPower 14500 battery 800 mAh specifications:
- Capacity: 800 mAh, actual 840mAh
- Rated voltage: 3.7V
- Maximum output current: 4.0 A
- Download times: over 500 reloads
- Plus pole: Button-headed
- Protection: Circuit 4.0A
At least these things are taken into account when using the battery!
If your battery does not have a protective circuit, remember the battery safety and correct use of the battery! Li-Ion batteries contain a lot of energy and can even explode or ignite when used incorrectly.
- Use a high-quality charger to charge at the latest when the battery reaches 4.2V voltage.
- Always perform charging under supervision
- Do not disassemble the battery below the lowest discharge voltage (usually approx. 2.5V)
- Do not exceed the maximum charging current of the battery
- Do not exceed the maximum discharge current of the battery
- Do not short-circuit the battery
- Do not attempt to remove parts from the battery or otherwise mechanically
- Do not exceed the maximum permissible battery temperature when charging or
- Do not use batteries with a damaged cover
- Do not attempt to remove the metal parts of the
- Do not let the battery get wet
- Do not connect cables or connectors to the battery with a standard soldering
- Store batteries so that they do not touch each other
- If your device has more than 1 battery, always use and charge them together